Assigning Fixtures To Masters (Creating An Inhibitive Master); Assigning Groups To Masters (Creating An Inhibitive Groupmaster); Assigning Cuelists To Masters - Philips Strand Lighting Quick Start Manual

500ML Lighting Control Console
QuickStart Guide
To assign a fader to act as the Grandmaster, press the [ASSIGN] key, followed by the [GO], or [PAUSE/BACK] key
of the fader that should act as the Grandmaster. The Assign Master Fader window (Figure 51) will open, asking you
what to assign to this master. Select Grandmaster.
Figure 51: Assign Master Fader Window - Grandmaster

Assigning Fixtures to Masters (Creating an Inhibitive Master)

Fixture Dimmer Masters are compared HTP, so the highest master will take precedence.
Hit the [FIXTURE] key while striking the [ASSIGN] key. The Fixture Pool window will be shown. Now select the
fixture from within the pool window followed by the [GO], or [PAUSE/BACK] key of the fader that should act as the
Dimmer Master.

Assigning Groups to Masters (Creating an Inhibitive Groupmaster)

Group and Dimmer Masters are compared HTP, so the highest master will take precedence.
Press and hold the [GROUP] key and press the [ASSIGN] key. The Group Pool window will be shown. Now select
the group from within the pool window followed by the [GO], or [PAUSE/BACK] key of the fader that should act as
the Dimmer Master.

Assigning Cuelists to Masters

To assign a cuelist (in the Cuelist Pool) to a master, press and hold the [OPEN] key and press the [CUELIST] key on
the keypad. The Cuelist Pool window will open (Figure 47 on page 34). Now press the [ASSIGN] key, tap on the
Cuelist you would like to assign to the master followed by the either a master's Play [] or Pause / Back Key [❚ ❚].
37
Working with Masters