500ML Lighting Control Console
QuickStart Guide
When the process finished successfully, click on the Close button as indicated in
Figure
18.
Figure 18: Export Show(s) to USB Screen - Export Completed
Closing a Show
To load a show (as described in
"Loading an Existing Show" on page
13), you must close any open shows. Do this by
pressing [SETUP] and then pressing the Close Show button on the Setup Toolbar
(Figure
19).
Figure 19: Setup Toolbar - Closing a Show
Note: If there are no shows loaded, the 500ML Lighting Control Console will not output DMX.
17
To Create or Load a Show