Selecting And Deselecting Groups; Working With Values; What Is The Programmer - Philips Strand Lighting Quick Start Manual

Designed to operate dimmers, led fixtures and moving lights

Hide thumbs Also See for Strand Lighting:

Table of Contents

500ML Lighting Control Console

QuickStart Guide

If you did not select an option from the Record Toolbar, a dialog window will open

(Figure

32) asking you what you

wish to do. Select the desired action by click the appropriate button on the screen.

Figure 32: Merge or Replace Group Inquiry Window

Selecting and Deselecting Groups

Press and hold the [OPEN] key and then press the [GROUP] button. The Groups pool window

(Figure 31 on page

24)

will open. You can select and deselect fixture groups by clicking on them. You may also select a Group on the

external monitor (if connected). To learn how to create a Fixture Group, see

"Creating a Group" on page

24.

The console follows the popular "Programmer" concept. This section will explain the concept in detail.

Figure 33: Programmer - Values Screen

The "Programmer" is the place where all of the programming happens. As soon as you modify a fixture's attribute

values by using any of the input methods for values, it will be displayed in the programmer.

The programmer always takes precedence over cuelists, this way you can, at any point in a show, modify the look on

stage. For a more in-depth look on how priorities are managed in the console, have a look at

"Error! Reference source

not

found.".

Working with Values

Table of Contents

500ml