Automatic Sampling Stop - Epson M-G3 Series User Manual

3.7

Automatic Sampling Stop

In the "MeasureContol" item on the Log Setting screen, sampling can be stopped automatically
by "Termination condition" check.
The stop condition is set by the following items.
・" Time " : Time specified in seconds
・" Count "：Count specified by sampling number
The automatic sampling stop function is effective only for the first sampling execution after enabling.
In the second and subsequent sampling, the automatic stop function is disabled and not performed.
When automatic stop is enabled, "Elapsed Time" indication of Logging Status becomes "Remaining
Time" to show the remaining time until automatic stop will occur.
*The automatic stop timing of sampling will vary from the set value depending on the processing
capacity of the PC.
IMU/USB Interface Board
Logger Software User's Guide (Rev.20181129)
SEIKO EPSON CORPORATION
3. Using the Software
12