Using The Software; Starting The Software - Epson M-G3 Series User Manual

3. Using the Software

3. Using the Software
This chapter describes basics of using the Software.
3.1

Starting the Software

Start the executable file of the Software (ImuLogger.exe).
* When this software is started for the first time or the IMU model is changed, restart the software after setting
"3.2.1 Serial port setting".
・Example of Main Screen when the attitude angle output is not supported with IMU model.
・ Example of Main Screen when the attitude angle output is supported with IMU model.
SEIKO EPSON CORPORATION 3
IMU/USB Interface Board
Logger Software User's Guide (Rev.20181129)