Table of Contents
Advertisement
3.1.2
Function principle
Boiler technology
All UNIMAT UT-L boilers boilers have a water guide
element installed below the return connector. With this,
the return water generates an injector effect through its
velocity as it flows back, so hotter boiler water is added
and mixes with the cooler return water. The targeted
feed of the return water results in excellent flow across
the entire boiler cross-section. Due to the flat
temperature slope in the boiler block, the boiler overall
provides an extremely even temperature distribution.
Fig. 6
Sectional view showing the function principle of the UNIMAT UT-L boiler
[1]
Burner door
[2]
Safety valve connector ( Fig. 51, page 73)
[3]
Water guide system
[4]
Return ( Fig. 50, page 72 and Fig. 53, page 76)
[5]
Flow ( Fig. 49, page 71)
[6]
Hot gas reversing chamber
[7]
Protective aluminium casing
[8]
High grade insulation without thermal bridges
[9]
First secondary heating surface (second pass)
designed as a double row
[10] Second secondary heating surface (third pass)
[11] Combustion chamber (first pass)
[12] Blast tube
UNIMAT
1
12 11
The flow through the boiler results in condensation-free
and safe heating operation with a minimum return
temperature as low as 50 °C.
The boiler is built using the 3-pass design and the
countercurrent heat exchanger principle. Together with
an effective heating surface design, these are the
prerequisites for low emissions and high energy
efficiency. Subject to the system, the UNIMAT UT-L
boilers achieve very high standard seasonal efficiency
[to DIN], which can be increased to up to 106 % with the
boiler with condensing heat exchanger.
2
3
4
Technical description | 9
5
6
7
8
9
10
6 720 803 977-01.1ITL
6 720 807 794 (2013/04)
Hide quick links:
Advertisement
Table of Contents
