Fitting; Transport And Handling; Delivery Method And Transport Options; Handling Dimensions - Bosch UT-L 1 Technical Manual

66 | Fitting

10 Fitting
10.1

Transport and handling

10.1.1

Delivery method and transport options

The UNIMAT UT-L boiler and UNIMAT UT-L boiler with
integrated heat exchanger are each delivered in a
transport unit.
10.1.2

Handling dimensions

For handling the boiler, it is essential to size the
entrance to the installation room slightly larger than the
boiler dimensions. See tab. 29 for the minimum handling
dimensions.
UNIMAT UT-L boiler
Boiler size
UT-L 1
UT-L 4
UT-L 10
UT-L 14
UT-L 18
UT-L 24
UT-L 28
UT-L 30
UT-L 34
UT-L 40
UT-L 42
UT-L 46
UT-L 50
UT-L 54
UT-L 58
UT-L 60
UT-L 64
Table 29 Minimum handling dimensions for UNIMAT UT-L boilers; the dimensions specified are recommended values and
may vary from system to system.
6 720 807 794 (2013/04)
UNIMAT UT-L boiler
Minimum width Minimum height Minimum width Minimum height
[mm]
– 1400
UT-L 2 1550
UT-L 6 1650
UT-L 8 1750
UT-L 12 1800
UT-L 16 1900
UT-L 20 1950
UT-L 22 2050
UT-L 26 2150
UT-L 32 2350
UT-L 36 2500
UT-L 38 2650
UT-L 44 2800
UT-L 48 2950
UT-L 52 3120
UT-L 56 3450
UT-L 62 3650
Transport
To transport the boiler block with a crane, only use the
two lifting eyes. These are fitted at the top of the boiler
pressure body, at the front and back.
The use of rollers underneath the base frame to
transport the system at floor level is not permitted.
There is a danger that the base frame will become
warped.
Entrance
UNIMAT UT-L boiler with flue gas
[mm]
1850
2000
2100
2200
2250
2350
2400
2500
2600
2800
2950
3100
3300
3400
3650
3950
4150
heat exchanger
[mm] [mm]
1500 1865
1650 2015
1755 2115
1855 2215
1910 2265
1995 2365
2060 2415
2155 2515
2250 2615
2435 2800
2605 2950
2750 3100
2905 3250
3045 3400
3240 3600
3555 3900
3750 4100
UNIMAT