Table of Contents
Advertisement
Maintenance and Repair
Blade Maintenance
18
If the blade is blunt, it can be sharpened in a specialised workshop. If the blade is damaged or
showing signs of imbalance, it must be replaced.
Carry out the following steps to change the blade:
Turn the mower over and rest it carefully on its side .
•
•
blade .
Install the new blade in the reverse order. Ensure that the blade is positioned correctly and the
•
Tighten the fastening bolt. The tightening torque should be approx. 25 Nm.
•
IMPORTANT! Always wear safety gloves when engaging in any maintenance work.
Only replace the blade with a suitable (legally we cannot prevent use of spares from other
companies) replacement blade as this will ensure top performance and safety under all conditions.
24
Customer Helpline 0345 605 2063
Hide quick links:
Advertisement
Table of Contents
