McGREGOR 7496428 Original Instruction Manual page 4

Safety Information
Important - Please read these instructions fully before starting assembly
Warnings Symbols (continued)
Wait until all moving parts have stopped completely
before touching them. The blade may continue to rotate
after the machine is switched off, a rotating blade can
cause injury.
Protection class II
Do not dispose of electrical equipment in domestic waste.
Cutting width ("XX" means 34cm, 37cm, 40cm)
Important! When using equipment, the following safety
precautions must be followed to avoid injuries and
damage.
• Read all operating instructions carefully and comply
with them. It is important to understand these
instructions and to acquaint yourself with the machine,
its correct usage and all safety requirements.
• Keep this manual in a safe place so that the
information is available at all times.
• If you give the equipment to any other person, give
them these operating instructions as well.
We accept no liability for damage or accidents which
result from non-compliance with these instructions.
4 Customer Helpline 0345 605 2063