Eaton Cooper Power Series Installation Instructions Manual
Bushing adapter, deadbreak apparatus connectors
Hide thumbs
Also See for Cooper Power Series:
- Installation, operation and maintenance manual (189 pages) ,
- Installation, operation and maintenance instructions (128 pages) ,
- Installation and operation instruction manual (52 pages)
Related Manuals for Eaton Cooper Power Series
Summary of Contents for Eaton Cooper Power Series
- Page 1 COOPER POWER Deadbreak Apparatus Connectors SERIES Effective May 2017 MN650058EN Supersedes July 2009 (S600-59-1) 600 A 15, 25 and 35 kV class bushing adapter installation instructions...
- Page 2 CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES. In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or other-wise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to...
- Page 3 Contents DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I SAFETY FOR LIFE .
-
Page 4: Safety For Life
FOR LIFE FOR LIFE Eaton’s Cooper Power series products meet or exceed all applicable industry standards relating to product safety. We actively promote safe practices in the use and maintenance of our products through our service literature, instructional training programs, and the continuous efforts of all Eaton employees involved in product design, manufacture, marketing and service. -
Page 5: Product Information
Upon receipt, inspect the shipping container for signs of damage. Unpack the bushing The Eaton Cooper Power series 600 A Bushing Adapter is adapter and inspect it thoroughly for damage incurred a factory assembled Loadbreak Reducing Tap Plug (LRTP) during shipment. - Page 6 600 A 15, 25 and 35 kV class bushing adapter installation instructions Place a screwdriver or the T-wrench through the hotsitck ● ● ● operating eye of the torque tool and tighten the bushing Combined O & T/Torque Tool: adapter until the tool ratchets. (20-25 ft.-lbs.) ●...
- Page 7 600 A 15, 25 and 35 kV class bushing adapter installation instructions Step 4 Attach drain wire Connect apparatus drain wire to common ground point ● ● leaving adequate slack for hotstick operation. (Refer to Figure 5.) 200 A INSULATED BUSHING ADAPTER PROTECTIVE CAP DRAIN WIRE...
- Page 8 2300 Badger Drive Waukesha, WI 53188 United States Eaton.com/cooperpowerseries © 2017 Eaton All Rights Reserved Eaton is a registered trademark. For Eaton’s Cooper Power series product Printed in USA information Publication No. MN650058EN call 1-877-277-4636 or visit: All trademarks are property www.eaton.com/cooperpowerseries.
Need help?
Do you have a question about the Cooper Power Series and is the answer not in the manual?
Questions and answers