Wi-Fi Setup - AcuRite 01538 Instruction Manual

Professional weather center
Table of Contents

Advertisement

About Weather Underground
Weather Underground
weather information via the Internet. Weather Underground
reports for most major cities across the world on its website, as well as local
weather reports for newspapers and websites. Its information comes from the
National Weather Service, and over 250,000 personal weather stations.
Wi-Fi Setup for Weather Underground
This weather station features wireless Internet connectivity in order to connect
and send your data to Weather Underground
WU (Weather Underground
wunderground.com prior to the following Wi-Fi setup.
1. Add this weather station to your Weather Underground
Sign in to your Weather Underground
Navigate to My Profile > My Weather Stations > Add New PWS.
Enter all required location info.
When prompted for "Station Hardware", select "AcuRite Pro Weather Center".
You will be provided with a WU Station ID and Station Key/Password
once you have submitted all required info (needed for step 5, below).
2. Power on the display (using included power cord).
3. Connect to the Wi-Fi signal (named AcuRite 01538)
of the AcuRite display from your computer or
mobile device. When prompted for a password,
enter the device ID, located on the back of the
display in the battery compartment
(Example: 24C86EXXXXXX).
4. Open your web browser on the device that is
connected to the AcuRite display. Type "192.168.4.1" in the address bar
and hit enter to access the AcuRite WiFi display settings website.
5. Enter or select your wireless network name, network password, and the
WU Station ID and Station Key/Password (created in step 1).* Press "Save
and Reset" to save your settings.
6. Confirm "
" is shown on the display. If you see "
the Troubleshooting section (see page 16).
7. Once connected, data from your 5-in-1 sensor will automatically begin
to upload to Weather Underground
www.wunderground.com or from a mobile device using the Weather
Underground
TM
*This weather station display only supports 2.4 GHz wireless networks.
is a commercial weather service providing real-time
TM
) account, please create your account at
TM
app, available from the iOS App Store or Google Play Store.
TM
TM
. If you do not already have a
TM
account.
TM
. Monitor sensor data remotely at
TM
3
provides weather
TM
account:
TM
DEVICE ID
############
x
" instead, refer to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents