Removal Of Line Filter; Fuse Block - Maytag RS511 Service Manual

Disassembly Procedures
!

Removal of Line Filter

!
WARNING
This unit must be unplugged to avoid electrical shock,
personal injury or death when working on the
microwave oven except when taking meter readings
requiring live voltage.
1. Disconnect power to oven.
2. Remove outer case, see "Outer Case Removal"
procedure.
3. Remove screws securing line filter mounting plate to
rear of oven.
4. Remove nut from mounting plate.
5. Disconnect and label wire terminals and remove part.
6. Reverse procedure to reassemble.
©2002 Maytag Appliances Company
WARNING
Line Filter
To avoid risk of electrical shock, personal injury, or
death, disconnect power to oven and discharge
capacitors before following any disassembly procedure.

Fuse Block

1. Disconnect power to unit.
2. Remove outer case, see "Outer Case Removal"
procedure.
3. Disconnect and label wire terminals.
4. Remove fuse from fuse block.
5. Remove screw (tamper resistant) securing fuse
block to chassis.
6. Reverse procedures to reassemble.
16021518 Rev. 0 25