Product Overview; Installation Environment - Interlogix UltraSync RS-3240 Installation Manual

Product overview

This is the installation guide for the following
UltraSync IP camera models:
 RS-3240 (1080p IP Wi-Fi Doorbell IR camera, US)
 RS-3241 (1080p IP Wi-Fi Doorbell IR camera,
EMEA)

Installation environment

When installing the product, consider these factors:
 Electrical: The doorbell camera may only be
connected to a mechanical doorbell that uses 16-
24 VAC power. The camera does not support
digital doorbells.
 Included transformer: RS-3241 includes an input
230 VAC/50 Hz transformer. Contact a qualified
electrician to properly wire the doorbell camera
according to national and local wiring code.
 Wi-Fi: The doorbell camera is only compatible with
2.4 GHz networks. Ensure that the location
planned for the installation of the camera is able to
receive a -65 dBM or better Wi-Fi signal.
 Network: We recommend an upstream bandwidth
of at least 768 kbps for each camera to connect to
the internet.
 Ventilation: Ensure that the location planned for
the installation of the camera is well ventilated.
 Temperature: Do not operate the camera beyond
the specified temperature, humidity, or power
source ratings. The operating temperature of the
P/N 466-2950-EN • REV B • ISS 07MAY18 © 2018 United Technologies Corporation. All rights reserved.
3