UNIVIEW IPC3612ER3-PF28 Quick Manual page 7

Use the power cable connector delivered with the camera.

Make sure the connector is in good condition (clip) and
secured into place. Do not fully stretch the power cord,
otherwise, the connector may be loose or disconnected due
to vibration or shake.
Use waterproof tape to protect the end of the tail cable.

Keep the tail cable from water.
When cleaning the camera, wipe the surface using clean and

soft cloth dipped with alcohol. When cleaning the lens, use
small amount of neutral detergent. Do not use thinner or
benzene.
Maintenance Precautions:
If there is dust on the front glass surface, remove the dust

gently using an oil-free brush or a rubber dust blowing ball.
If there is grease or a dust stain on the front glass surface,

clean the glass surface gently from the center outward using
anti-static gloves or an oil-free cloth. If the grease or the
stain still cannot be removed, use anti-static gloves or an
oil-free cloth dipped with detergent and clean the glass
surface gently until it is removed.
Do not use organic solvents, such as benzene or ethanol

when cleaning the front glass surface.