Starting The Camera; Setting Your Camera Over The Lan - UNIVIEW IPC3612ER3-PF28 Quick Manual

Starting the Camera

To power on the camera you need to buy a power adapter
separately. After you have mounted the camera properly, connect
the camera to power.
3

Setting Your Camera over the LAN

To view and configure your camera via the LAN (Local Area
Network), you need to install the EZStation to find your camera
and change its IP address.
Please contact your dealer to obtain the EZStation.

Please refer to the user manual of EZStation for

detailed information.
1. Connect your camera and your PC as shown in the figure
below to ensure the routing is available.
9