UNIVIEW IPC3612ER3-PF28 Quick Manual page 23

Your camera is operating properly and connected to the

network.
The PC client you are using is installed with Internet Explorer

7.0 or later. IE 8.0 is recommended.
Follow these steps to access your camera through the web
interface:
1. Open the IE on your PC.
2. In the address bar, input the IP address of your camera
(default IP is 192.168.0.13) and then press Enter to open the
login page.
3. Enter the username (default is "admin") and password
(default is "admin" or "123456") and then click Login.
Install the ActiveX at your first login. For the detailed steps,
see Installing the
ActiveX is completed, open your IE to log in.
ActiveX. When the installation of the
12