Rinse Aid Dispenser - Inalto DWI62CS User Manual

60cm integrated dishwasher
Hide thumbs Also See for DWI62CS:
Table of Contents

Advertisement

3.
3.
to
to
Prior
Prior
using for the first time
using for the first time
Before using your dishwasher for the first time:
A.
Fill the rinse aid dispenser
B.
Fill in detergent
A. Rinse Aid Dispenser
A. Rinse Aid Dispenser

Rinse Aid Dispenser

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
When to Refill the Rinse Aid Dispenser
Unless the rinse-aid warning light on the control panel is on, you can always estimate the amount from the color
of the optical level indicator "C "located next to the cap. When the rinse-aid container is full, the indicator
will be fully dark. The size of the dark dot decreases as the rinse-aid diminishes. You should never let
the rinse aid level be less than 1/4 full.
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 ful l
1 / 2 ful l
1 / 4 full - Should refill to eliminate spotting
Empty
1 1
1
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2
Carefully pour in the rinse-aid into its dispenser, whilst avoiding it to overflow.
3
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe away any spills
with a damp cloth. Don't forget to replace the cap before you close dishwasher door.
Attention!
Clean up any rinse aid spill during filling with an absorbent cloth to avoid excess foaming during the next wash.
2 2
3 3
C
C (Rinse-Aid indicator)
3 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents