Gemini FlexiPen 120 User Manual page 23

Plan
The plotter does not feed
the paper.
The plotter crumples the
paper.
The paper is not properly
dragged (there are
overlapping in the plotted
file)
There are gaps on
horizontally and
vertically pieces from the
,
marker are resized.
Please carefully check the above malfunctions and solutions, if it still could not be
solved, please contact our The Service Department.
1. The paper roll is over.
2. The paper sensor is
seeing "something".
3. The feed bar makes
contact with the fastening
holder.
The contact surface
between the paper and
the plotter is dirty.
The pressing whiles are
dirty.
You have an Antivirus
program installed on your
computer which damages
the transition between
plotter and computer.
User guide – Plotter Flexipen 120/165
1. Replace the paper roll.
2. Remove the objects
from plotter area.
3. Fix properly the bar to
do not make contact with
the holders.
Clean and lubricate the
contact surface.
Clean the continuous
pressing whiles.
Uninstall the Antivirus
program.
23