Using The Gemini Plt Spooler Program; General Presentation; The Program Main Window - Gemini FlexiPen 120 User Manual

Plan

7.2 Using the Gemini PLT Spooler program

7.2.1 General presentation:

- The Gemini PLT Spooler program will help you plot all HPGL (PLT) or CUT
(RS274D) files;
- It works in spooler mode: receives the files in a dedicated folder, delivers them to
the plotter and moves them in another folder after plotting.
- When you start the computer the Gemini PLT Spooler program is already
launched and you can see its icon down on the right of the screen. To access the
program you will have to double click on its icon. To close the program you will have to
right-click in System trey on the program icon, and when the menu appears click on
"Exit". The "X" symbol only hides the program.

7.2.2 The program main window:

When you turn on the computer the Gemini PLT Spooler program icon is placed in
the system tray. If you access it you get in the program's main window.
The program main window is structured in the following way:
The Menu bar is on the top of the screen and it contents the next menus:
- Plotting,
Tools, Setting
-
Help.
-
User guide – Plotter Flexipen 120/165
14