Electric Heating - La Cimbali M39 Dosatron TE Engineer's Manual

23 April 2014
wednesday 15:15:04
To enter programming, press the
The following message will appear on the display:
 TECHNICAL PROG.
KEY MENU
Self. learning
CONFIGURATION
TESTING
Display available menus: using the
ACCESSING the menus: position the cursor on the desired line using
the and keys, then press
the "KEY SELECTION" menu)
The technical staff can activate or deactivate the resistance (if the
boiler resistance is disabled, automatic level control is inhibited).
Operate as follows:
1) Access the technical programming panels;
2) Press and hold the OK key for several seconds to activate/
deactivate the resistance.
Press one of the coffee dispensing keys (the relative led will remain on,
not flashing). The following message will appear on the display:
 KEY MENU
Type
Water dose
Select grinder
2. Technical Programming Access
key and then OK for 3 seconds.
+ 
and keys, then press
(press a selection key in the case of

3. Electric heating

4. Key menu - Coffee selection
1 coffee
+ 
0100
MM1
Changing menus and sub-menus: position the cursor on the desired
line using the and keys and then press
 KEY MENU
Type
Water dose
Select grinder
Change the selection or value, again using the and keys
Note: when editing data, the cursor becomes "", or a slider bar appears
with the minimum and maximum values that can be set:
Exiting the programming panels: there are two options:
1) Confirm the changes by pressing OK
.
2) Exit the menu, leaving the data unchanged, by pressing
The coffee selection settings that can be changed are:
- type (key customisation, e.g. 3 espressos for 1 "short, normal, long",
3 espressos for 2 "short, normal, long", stop, disabled).
- water dose (volumetric dosing device impulses, 0 ÷ 1999 in steps of
1).
- Select grinder(grinding-machine customisation)
-
MM1-MM2 - Possibility of connecting from 1 to 2 grinders with the
optional Bluetooth function.
3 EN
1 coffee
+ 
0100
MM1