Bds Activation - La Cimbali M39 Dosatron TE Engineer's Manual

In the SW 047.00.H0 and subsequent versions, the connection is automatic and the
to press a dispensing key if the configuration has been completed successfully. In the event of communication problems, the "COMMUNICATION
FAILURE" message will appear on the display followed by the name of the disconnected grinder/dispenser. The message disappears automatically
when the Bluetooth connection is restored. A common cause of this failure is the grinder/dispenser being turned off with the machine turned on.
-NOTE: Only for previous versions does the symbol remain on the display of the machine and the grinder/dispenser after setting wireless
communication mode; when a double coffee dispensing key is pressed, the icons change to
When the machine or grinder/dispenser are turned off, at the next power-on the symbol is shown on the display
1
Return to the "CONFIGURATION" parameters by pressing the
key; using the and
and press :
 CONFIGURATION
Standard data
BOILER
WIFI
BLUETOOTH
BDS
All the TECHNICAL MENU items of the "Magnum Bluetooth" grinder/dispenser
can be viewed only after the default technical code has been entered.
SINGLE DOSE
DOUBLE DOSE
(Red)
(Green)
SPECIAL DOSE
(White)
BDS activation and sensor configuration
keys, move the cursor to "BDS"
+  + 
NO
NO
symbol is displayed immediately. It is no longer necessary
to indicate successful wireless communication.
2
Use the and keys to indicate
OK key to confirm
 CONFIGURATION
Standard data
BOILER
WIFI
BLUETOOTH
BDS
12 EN
.
and then press the
+  + 
NO
YES
TECHNICAL MENU
CONFIGURATION
BLUETOOTH
B D S
O F F
BDS DISABLED
B D S
1 - - 2
ENABLED