Data Menu : Counters - La Cimbali M39 Dosatron TE Engineer's Manual

RC Boiler resistance
Evc Boiler load solenoid valve
P
Boiler pressure
LIV Boiler water level
TV Steam temperature (if the Turbosteam system is not present,
this parameter is not displayed)
To enter the data menu, press the
key; the following is displayed:
 DATA MENU
COUNTERS
WASH 1 ARCHIVE
Archive Rinsing
MALFUNCT. ARCHIVE
Averages Archive
When positioning the cursor on the line "COUNTERS" and press the
and keys, and then press the
 COUNTERS
KEY MENU
N° coffee gr. 1
N° water
N° steam
No. steam + air
The settings that are counted are:
- select key (single selection counters)
- coffee (number of coffee-based beverages);
- water - (number of times water dispensed);
- steam (number of times steam dispensed with steam key);
- steam + air - (number of times steam and air dispensed with
the Turbosteam key);
- tot. coffee (total number of coffee-based beverages).
The line "No. coffee" appears as many times as the number of groups
of the machine.
Legend
8. DATA menu: COUNTERS
key and then press the " i " (27)
+ 
key, the following is displayed:
+ 
01234
00123
00145
00145
Below are the symbols used to define the components that can be
accessed for movement:
MP Pump Motor
Em
Anti-backflow solenoid valve
Eds Drying solenoid valve
Mc Autosteam compressor motor
Ets
Autosteam solenoid valve
Evc Charge-boiler solenoid valve
Eaf Cold-water solenoid valve
Eac Water solenoid valve
G1÷G4 Dispense-coffee solenoid valve
The counters can be reset by positioning the cursor over the specific
item, pressing the key and then the or keys; press OK to
confirm the reset.
Note: the settings that cannot be cleared are:
- tot. coffee
20 EN