How To Fasten The Seat Belts (2-Point) In Second Row; Seat - Mahindra ALTURAS G4 2019 Owner's Manual

To use the seat belt, remove the seat belt from the guide
before pulling out the webbing from the retractor. Pulling out
the webbing from the retractor without removing it from the
webbing guide can cause damage to the webbing guide or the
belt itself.
3.10 How to Fasten the Seat Belts (2-Point) in Second
Row Seat
• Pull out the latch plate at the right of the seat
Put the lap belt as low as possible across the hips. Do not put it
across waist. In an accident, the belt may apply pressure to
your abdomen. This may cause serious internal injuries.
© Copyright Mahindra and Mahindra Ltd. 092018
To adjust length, hold the metal latch plate at a right angle to the
belt and pull the belt. To shorten, pull the free end of the belt away
from the latch plate, then pull the belt clip to take up the slack.
• Insert the metal latch plate into the buckle until it clicks. Position
Y4C040
• If the belt is too tight or slack on your hips, readjust the belt
• To unfasten the seat belt, press the red button on the buckle
the belt as low as possible across your hips, not across your
abdomen
SAFETY UNIT
Y4C041
Y4C038 Y4C087
3-17