Sense SE-350-WT-HAND Manual page 9

Channel Scan
Scan oF Function is deactivated
SCAN on Function is activated. Scan to confirm if the
channel is occupied. The program will skip
this channel to prevent interference.
NOTE: This function only works in preset mode.
Audio Output Attenuation (XLR)
ATT oF No Audio attenuation at output
ATT on 20dB attenuation at output
Key Lock
LOCK on Key lock ON
LOCK oF Key Lock OFF
When Transmitter is Selected
Microphone Input Sensitivity
Normal Gain:
Sensitivity
Gain:
Gain:
Gain:
Gain:
Gain:
Gain:
Gain:
Gain:
Gain:
Gain:
ATT Microphone Audio Input Attenuation
ATT oF No attenuation at Input
ATT on 20dB attenuation at audio input. (This
depends upon if the transmitter supports this
function.)
Support: 866.838.5052
+15dB
+14dB
—
+2dB
+1dB
0dB (default)
-1dB
-2dB
—
-14dB
-15dB
PG 9 |