Wireless Receiver - Sense SE-350-WT-HAND Manual

5. Wireless Receiver

11
7 6
MIN. MAX.
VOL.
10 9 8 5
Front Panel
Annotations
1.
12 13 14
2. : (Frequency Adjustment) While in setting
mode, press to select between function settings.
Pressing while not in setting mode will adjust the
volume.
3. Set: (Function Settings) Press and hold for 2 seconds
to enter setting mode. Press again to select the
function to set.
4. LCD Display
5. AF Signal Level
6. RF Signal Level
7. Remoset Indicator: Shows current pairing status.
Flashes rapidly during data transfer and stops when
transfer is complete. The flashing will slow down if a
sync fail occurs.
8. Remoset U: Allows synchronization of the transmitter
after a setting is modified. Press Remoset U to sync
the settings to the transmitter.
9. Volume Control
10. Ultrasonic Transmission Unit: Transmits data at
ultrasonic frequency. Point the ultrasonic receiver of
the microphone to the transmitting unit of the receiver
at a distance of 30 cm.
11. Antenna
Support: 866.838.5052
11
4 2 1
3
Press once to turn on the
15 15
MIN. MAX.
VOL.
10 9 8 5
12 13 14
Back Panel
22
21
LCD Display
Back Panel
12. DC Power Socket: 12 VDC 500mA power supply.
13. 6.3 mm Phone Jack: Unbalanced audio output jack.
14. 3P XLR Male Port: Balanced audio output jack
15. Female BNC Antenna Port: Connect the 50 ohm
BNC antenna here. The antenna also boosts power
for and external antenna booster.
LCD Display Symbols
16. Antenna AB:
17. Transmitter Battery Level:
18. Receiver Mute:
19. Squelch Level:
20. Output Attenuation:
21. Group/Channel:
22. Frequency:
23. Key Lock:
PG 7 |
DIVERSITY RECEIVER
3
15 15
23 16
17
18
20 19