Rack Mounting - Sense SE-350-WT-HAND Manual

| PG 6
Single Rack Mount
The single rack mount is included with
Wireless Receiver. Secure the SE-350-WR-
1CHD with 4 screws and secure the mount
to the rack with 4 more screws. If desired,
thread the antennas to the front rack ears.

4. Rack Mounting

Installation with Single Rack Mount
• Verify no cords are attached to the receiver. Turn over
the rack adapter and receiver. Insert the receiver into the
desired rack adapter slot.
• Align, insert, and thread 4 included M3 screws into the 4
mounting holes of the rack adapter and receiver.
• Mount the rack adapter to the rack using rack screws (not
included) into the rack holes.
Antenna Booster
Raise your signal strength by 10dB with the SE-ANT-BM. Mount
the antennas to a wall or ceiling for an even greater signal pickup.
Extend it further with the B-ANT-EXT-20M (also sold separately).
MAX.
MIN.
VOL.
MAX.
MIN.
VOL.
www.snapav.com