Body-Pack Transmitter (Sold Separately) - Sense SE-350-WT-HAND Manual

| PG 8

6. Body-pack Transmitter (Sold Separately)

The SE-350-WT-BODY transmits sound via wireless signal used for corporate presentations, houses of
worship, audio/video conferencing, video, film and sound reinforcement, or other applications where
low-profile, discreet placement is preferred.
Features
• Phase-locked Loop (PLL) synthesized tuner ensures reliable performance
• 2 "AA" Alkaline batteries are included
• Compatible with rechargeable AA batteries. Recharge with SE-350-WT-CH
•
• Equipped with 4-Pin Mini XLR connector
• LCD display with channel and battery life indicator
• The lock-on function prevents tampering and RF interruption
• REMOSET U technology automatically communicates frequency parameters from the
SE-350-WR-1CHD receiver to the transmitter
• Extended dynamic range and smooth frequency response
Installation Tips & Guidelines
After placing batteries inside the SE-350-WT-BODY and attaching the microphone, pair the wireless
frequency with the wireless receiver. Refer to section 8 for full instructions on how to pair the frequency.
Annotations
1. LCD Display
2. Ultrasonic Receiving Unit: Receives pairing
signals from Transmission Unit
3. REMOSET Indicator: Blue = Pairing successful
| Flashing Blue = Data receive error
4. Power: Press once to turn on | Press and Hold
until display shows
Press to return to the main screen when in
Setting Menu
5. : Use to cycle through settings in
Setting Menu
6. SET: Press to enter Setting Menu and Save
Settings
7. Mute Switch/LED Indicator: Green = Power
On | Red = Low Battery | Flashing Green =
Transmitter Muted | Flashing Red & Green = Transmitter Muted, Low Battery
8. Battery Tray
1
2
3
4
7
5
6
8
www.snapav.com