Before You Get Started; How It Works - Sense SE-350-WT-HAND Manual

| PG 4

1. Before You Get Started

Sense microphones deliver excellent sound reproduction when and where you need it most. Each micro-
phone and/or microphone accessory is designed for specific applications that serve multiple purposes,
so even if you don't have each one of the microphones or accessories listed, read through each descrip-
tion and you may find an idea or more helpful information that allows you to work smarter, not harder.

2. How It Works

MIN.
ECA-70 MIXAMP-1 -240
MIC1 MIC2
5 5
4 6 4 6
3 7 3 7
2 8 2 8
1 9 1 9
0 1 0 0 1 0
Distributed Audio System
The wireless receiver can be placed on a surface or mounted in a rack. The antennas can be mounted in
the front, rear, or extended with an antenna booster (sold separately) for wireless sound pick up from a
hand-held microphone transmitter or a hands-free body pack (see below for full list of accessories). The
SE-350-WR-1CHD receives transmissions up to 500 feet, then outputs into a distributed audio system.
There are just a few steps to take in order to have a proper setup with your Sense microphones.
Step 1. Connect the wireless receiver to the mixer or a microphone input of an amplifier.
Step 2. Connect the included AC/DC power supply to the receiver. It is recommended to connect it to a
surge protected power outlet.
Step 3. Connect the two included antennas to the receiver.
Step 4. Match the frequencies between the receiver and the transmitting microphone on each
transmitting device. See Wireless Transmitter and Receiver Adjustments section.
MAX.
VOL.
POW ER
OUTPUT LEVEL
SOURCE1 SOURCE2 SOURCE3 SOURCE4
MASTER
MIC3 MIC4 SOURCE BASS TREBLE
5
5 5 5 0 0 4 6
4 6 4 6 4 6
3 7 3 7 3 7 3 7 ON
2 8 2 8 2 8 2 8 OFF
1 9 1 9 1 9
1 9
0 1 0 0 1 0 0 1 0 -1 2 +1 2 -1 2 +1 2
0 1 0
Transmit audio from 1 or 2
channels up to 500 feet
3
3
Hands-free Mic
Transmitter
Handheld
4
www.snapav.com