Table of Contents
Advertisement
"Ruff 'n Rustic" All American Barn
Door Track and Trim:
It is far easier to paint the Door Track, Door Trim
and Window Trim before gluing them in place, but
do not paint gluing surfaces or in the grooves.
Hold the Trim in place, mark the cuts with pencil...
there is enough trim to get all the cuts from the ma-
terial supplied, but a wrong cut can leave you with
short pieces when you need long pieces.
Plan ahead!, then make your cuts.
Use an X-Acto style Razor Saw for best results.
11. Cut and glue pieces of
the Doors (Illustration #9 & #10) see page 10.
1
12. Glue a 16
/
" length of Door Track to the
2
Front panel, fl ush at the bottom, and centered side-
to-side (Illustration #11).
1
Glue the upper 16
/
" Door Track to the Front
2
panel using both Doors as spacers (leave a loose
fi t).
1
13. Glue 5
/
" Window Track for the Loft
4
Doors using Loft Doors as spacers (loose fi t).
7
14 Glue
/
" Stnpwood 9
l6
the Front panel, covering the edge of the wall ma-
terial (Illustration #12).
15. Frame and trim the Base-Floor Windows
7
with
/
Stripwood (Illustration #13) see page 10.
16
Use the remaining trim to build stalls, manger,
troughs, a ladder ...anything you can think of for
a barn. The last pages of this instruction have
sketches and plans for the accessories we made
from this stripwood. You have enough material for
all these items and more.
Be imaginative and have fun!
1
/
" Stripwood to
4
5
/
" to each end of
8
Illustration #9
Trim the outside
of the Loft Doors
Illustration #10
Trim the outside
of the Big Doors
Page 5
Advertisement
Table of Contents
