For A Network Twain Scanner - Ricoh 2045e Scanner Reference

Mixed size selection
A When originals of different
sizes are placed, select [Mixed
Size].
Note
r If [Mixed Size] is selected and
[Auto Detect] is selected for
scan size, the maximum size
detected is set as the scan
size. For originals smaller
than this size, a blank space
will appear in the resulting
image.
r Originals of different width
may be sometimes scanned a
little slantways because the
guide of the original cannot
be fitted to the size of the
small original.
Orientation selection
A Press the key for the same ori-
entation as the actual orienta-
tion of the original,
Reference
p.35 "Specifying original ori-
entation and setting origi-
nals"
C
Press [OK].
Note
r The current settings are dis-
played.

For a Network TWAIN Scanner

A
Open the Scanner Properties dia-
log box.
Reference
p.96 "Scanning Originals"
B
Select the position from the [Docu-
ment:] list in the [Document] area.
C
Select [
the [Orientation:] list.
Reference
p.35 "Specifying original orien-
tation and setting originals"
D
When the originals are placed in
the ADF, select [Simplex] or [Du-
plex] in the [Side:] list.
Note
r If originals of different sizes are
placed in the ADF, specify the
document size or detection
method in the [Size:] box. If [Au-
or .
to detection (Uni-size)] is selected,
all originals are scanned using
the size of the first page. If [Auto
detection (Multi-size)] is selected,
all originals are scanned accord-
ing to their own width. For both
Uni-size and Multi-size, all orig-
inals are scanned using their
own length.
Original Orientation and Scan Area
/ ] or [ / ] from
3
41