Playing Tracks In A Specific Order (Program Playback - Denon DCD-100 Owner's Manual

Contents Connections
Playing tracks in a specific order
(Program playback)
Up to 25 tracks can be programmed.
1
In the stop mode, press PROGRAM.
"PROG" is displayed on the display.
2
Use 0 – 9 and +10 to select the tracks.
GExampleH
To program tracks 3, 12 to play in that order: Press 3, +10 and 2 one
after the other.
3
Press 1/3.
Playback starts in the programmed order.
0 When RANDOM P is pressed during program playback, the programmed tracks
are played in random order.
0 When REPEAT L is pressed during program playback, the tracks are played
repeatedly in the programmed order.
NOTE
0 The program is cleared when the disc is ejected or the power is turned off.
Front panel Display
Playback Settings
o Checking the order of the programmed tracks
In the stop mode, press 9.
The tracks are shown in the programmed order in the display each
time 9 is pressed.
o To clear the last track programmed
In the stop mode, press CLEAR.
To clear the last track programmed.
The last track programmed is cleared each time the button is pressed.
o Clearing the all programmed track
In the stop mode, press PROGRAM.
24
Rear panel
Tips
Remote Index
Appendix