Table of Contents
Advertisement
2.) Ground - Remove the thumb screw marked GND. Connect
your central station ground to the thumb screw and screw it
back into the radio.
3.) Speakers - Connect powered stereo speakers to the jack
marked PWR-SPKR using a 1/8" (3.5mm) stereo TRS plug.
4.) This receiver requires an AC input of 90 to 264 VAC
frequency 47-63 Hz (auto sensing).
5.) Ethernet Connection - Connect one end of the supplied
CAT 5 Ethernet cable to the transceiver. The other end of
the CAT 5 Ethernet cable can be connected directly to the
100/1000BaseT Ethernet port on your computer if you do
not have a wired Ethernet network in your shack. Otherwise
connect the CAT 5 Ethernet cable to an open 100/1000BaseT
Ethernet port on your firewall/router or Ethernet switch.
For a more detailed description of connecting a FLEX-6000
to a LAN or directly to your PC, please refer to the HelpDesk
article "How to Connect Your FLEX-6000 to a LAN"
(http://helpdesk.flexradio.com/entries/23497553-How-to-
Connect-your-FLEX-6000-to-a-LAN).
Advertisement
Table of Contents
