FlexRadio Systems FLEX-6700R Signature Series Quick Start Manual page 15

PDF reader)" option to display the SmartSDR for Windows
Release Notes after SmartSDR installer has completed the
software install.
If you want to start the SmartSDR for Windows application
after the SmartSDR installer has completed, leave the
"Launch SmartSDR" option checked.
Click FINISH when you have made your selections.
Step 3. Starting the SmartSDR for Windows Application
for the First Time
Plug in the AC power cord that is connected to the FLEX-
6700R Signature Series SDR. (Note: the fans will run anytime
the receiver has power applied.)
Power on the FLEX-6700R by pressing the power button. The
LED display will initially show the text "Calibrating...". Once
the FLEX-6700R is ready, it will display the receiver model
name and the Power button LED will be illuminated green.
Locate the SmartSDR application icon on the desktop as
shown below and double click on it to start SmartSDR for
Windows.
The SmartSDR Radio Setup screen will be displayed. Click on
your FLEX-6000 Signature Series SDR displayed on the left
hand side to select and then click on the Connect button as
shown below.