Table of Contents
Advertisement
FLEX-6700R Rear Panel
1
USB 2.0 Port (x2): for peripheral connections
2
IEC AC Power Connector (100-240VAC, 50-60Hz)
3
Powered Speaker: 1/8" (0.32cm) TRS phono connector
4
Accessory Connector: DB-15HD - see pin out in FLEX-6000 HW
manual
5
10 MHz Reference Clock Input: RCA connector
6-8
Auxiliary Open Collector outputs #1, #2, #3; RCA connectors
9-10
Receiver Antenna Ports #1 and #2: BNC
11
10MHz Reference Output: SMA connector (with GPSDO option only)
12
Twisted Pair Ethernet port: RJ-45 - 100/1000 Twisted Pair
13
GPS Antenna Input: SMA connector - (with GPSDO option only)
14
Remote Power On: RCA connector
15
No Connection
16-17
Auxillary Input #1, #2; RCA connectors
18
Chassis Ground: #8 Thumb screw
19
Attention Label: !Warning: All Input/Output connections, including
front panel I/O connections, may be static sensitive!
Advertisement
Table of Contents
