Settings You Can Change With The User Tools; Basic - Ricoh 5502 System Settings

Settings You Can Change with the User
Tools
Reference
For how to access the User Tools, see
Settings)".
Basic Page 1
Menu
Operation Panel Beeper The beeper (key tone) sounds when a key is pressed.
Ready Operation Panel
Beeper
Copy Count Display
Auto Response (Hu-
man) Sensor
Description
This beeper can be turned on or off.
Note
Default: On
Specify whether to sound the beeper when the machine be-
comes ready for copying immediately after Energy Saver
mode is deactivated or the power is turned on.
Note
If the "Operation Panel Beeper" setting is "Off", the
beeper does not sound irrespective of the "Ready Opera-
tion Panel Beeper" setting.
Default: On
The copy counter can be set to show the number of copies
made (count up) or the number of copies remaining to be
made (count down).
Note
Default: Up (count up)
If the machine does not detect anyone using it for a certain
period of time, it will switch automatically to one of the reset
modes – Auto Reset, System Reset, Energy Saver mode, Low
Power mode or Auto Off. You can cancel this setting.
If "Low Power Timer" is set to "0", "Auto Response (Hu-
man) Sensor" is disabled.
Note
Default: Yes (On)
Reference
See "Low Power Timer" in

Settings You Can Change with the User Tools

P.4 "Accessing the User Tools (System
P.7 "Basic Page 1".
1
7