Exiting From The User Tools - Ricoh 5502 System Settings

D
Change the settings by following the instructions on the display panel.
Then press the [OK] key.
Note
[OK]: Press to set the new settings and return to the previous menu.
[Cancel]: Press to return to the previous menu without changing any data.

Exiting from the User Tools

A
After changing the User Tools settings, press the [Exit] key on the User
Tools Main Menu.
Changing the User Tools is completed, and the machine is ready for copying.
Note
To exit from the change of the machine's default settings and return to
Copy mode, press the {User Tools/Counter} key.
You can also exit from the User Tools by pressing the {User Tools/Counter}
key.
Accessing the User Tools (System Settings)
1
5