Advertisement
F
IRES OF
The mantel consists of-
1 pc left leg
1 pc right leg
1 pc beam
1 pc shelf
1 pc hearth [optional]
It is prudent to assemble some of the pcs as a dry run before you begin to install
the system, to insure that you understand how all parts fit together. This is also
an excellent time to check the relationship of these pcs to the fireplace itself, to
insure that it is installed at the correct height, and is in the correct position
relative to the wall.
Carefully lay out the boxes in an area of the room where they will be out of the
way, and open them up. Remove any loose packing, and with care, pull the
pieces out and lay them down on the floor where they can individually be
accessed.
At all times, it is necessary to be as clean and careful as possible. Check the fit
of all joints before letting go of components, to insure that they are properly
seated. Insure that hands are clean, and use the gloves to insure that no
smudges or marks are left on the surface of the mantel.
T
I
I
RADITION
NSTALL
P
AGE
C
NSTRUCTIONS FOR
ORVALLIS
4
12
OF
#4008
Advertisement
