Savin 2555 Copy Reference Manual page 73

Copying
Erase
This function erases the center and/or all four sides of the original image. This
is useful for avoiding shadows on the copy image caused by the bound originals,
such as books.
This function can be used in three ways:
2
Border
This mode erases the edge margin of the original image.
Center
This mode erases the center margin of the original image.
Center/Border
This mode erases both the center and edge margins of the original image.
Note
You can change the width of the erased margin as follows:
Metric version
Inch version
The default setting of the erased margin is as follows. You can change this set-
tings with the User Tools. See "Erase Border" and "Erase Center" in
"Page Format
Metric version
Inch version
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted.
Metric version
Where Original Is Set
Exposure glass
Document feeder
*1
You can select from 8
tem Settings). See "<F/F4>Size Setting" in the System Settings manual.
172
3 – 50mm (in 1mm steps)
0.1" – 2.0" (in 0.1" steps)
1
/ ".
2
10mm
0.4"
Paper Size and Orientation
A3L, B4L, A4KL, B5KL, 8
A3L, B4L, A4KL, B5KL, A5KL, B6KL,
11" 17"L, 11" 15"L, 8
13"L
1
/ " 13", 8
2
*1
1
/ " 13" and 8" 13" with the User Tools (Sys-
4
P.317
1 *1
/ " 13"L
2
2 1
/ " 11"KL, 8 / "
1 2