Savin 2235 Operator's Manual page 60

AdonisC2_ENcopy122F_FM.book Page 47 Thursday, February 15, 2001 3:23 PM
❖ ❖ ❖ ❖ When the 2 Tray Finisher is
installed
Note
❒ When the optional finisher is in-
stalled, use the User Tools to dis-
play [Rotate Sort]. ⇒ "Select Stack
Function" in P.233 "Input/Out-
put".
B
Enter the number of copy sets
with the number keys.
Limitation
❒ The maximum number of sets is
999.
Note
❒ To change the entered number,
press the {Clear/Stop} key.
C
Set your originals, then press the
{ { { { Start} } } } key.
When setting a stack of originals
in the document feeder
A Set a stack of originals in the
document feeder, then press
the { { { { Start} } } } key.
Note
❒ The last page should be on
the bottom.
Sort/Stack/Staple
❒ If an original is misfed dur-
ing sorted copying, reset
your originals in the docu-
ment feeder according to the
instructions on the display.
The display will indicate the
number of scanned originals.
When setting an original on the
exposure glass or in the
document feeder using Batch
mode
Reference
⇒ P.33 "Batch mode".
A Set the original, then press the
{ { { { Start} } } } key.
Note
❒ Start with the first page to be
copied.
B Set the next original. When it is
placed on the exposure glass,
press the { { { { Start} } } } key.
Note
❒ Set the original in the same
direction as the first one.
C After all originals are scanned,
press the { { { { #} } } } key.
2
47