Setting Up The Instrument - TESTO 108 Instruction Manual

8. Setting up the instrument

In the set-up menu the unit, type of probe, and Auto-off -Time
can be changed.
The set-up menu must always be completely run through, also
if the only one parameter has been changed.
✓ Instrument is switched off.
1 Switching the instrument on:
- Display test appears.
2 hold pressed down for about 3 sec during Displaytest.
- Configuration mode is opened, after presetting °C or °F is
displayed.
3 Choose °C or °F unit:
- After presetting Type K or Type T is shown.
4 Choose probe type Type K or Type T:
with .
- After presetting 10, 30, 60 or off are displayed.
5 Auto-off Time 10, 30, 60 or off choose:
with .
- The configuration is finished. With the new settings, the
instrument changes in measurement mode.
8. Setting up the instrument 13
Press quickly.
press and confirm with .
press and confirm
press and confirm