SATO M5900RVe Operator's Manual page 45

Unit 4: Operation
MENU
REPRINT W/FEED
YES NO
FORWARD/BACKFEED
DISTANCE DEFAULT
EXT PIN9 SELECT
MODE1 MODE2
EURO CODE
SELECT LANGUAGE
PRIORITY SETTING
COMMAND LCD
IGNORE CAN/DLE
YES NO
IEEE1284
ACK SIGNAL 00.5
MENU
COUNTERS
HD DSP CUT LIFE
HEAD COUNTER
0.0M
HEAD COUNT CLEAR
YES NO
DSP COUNTER
0.0M
DSP COUNT CLEAR
YES NO
CUT COUNTER
0.0M
SATO M5900RVe Operator Manual
SERVICE MODE
DESCRIPTION
Sets reprint of previous labels. Prints one page of the previously
printed contents by pressing the FEED key during ONLINE. The
default value is NO: do not reprint. LINE key moves the cursor
and the FEED key selects the option.
Sets the peel-off paper feed distance. The paper feed/backfeed
may be set from 0-255mm. The actual Feed/Backfeed distance
is equivalent to VR value + Paper Feed quantity. LINE key
moves the cursor and the FEED key selects the option.
Switches to external signal (9 pins) output mode. LINE key
moves the cursor and the FEED key selects the option.
Sets Euro Code. Selects the assigned code of the Euro mark.
The default value is D5 (HEX). LINE key moves the cursor and
the FEED key selects the option.
Sets the language to be displayed on the LCD screen. There
are eight language options available. LINE key moves the
cursor and the FEED key selects the option.
Sets priority of commands. Sets software commands as being
invalid in regards to print darkness, print speed, and base
reference point id LCD is selected. The default value is
COMMAND: conned settings are valid. LINE key moves the
cursor and the FEED key selects the option.
Sets 1 byte command as being valid or invalid. Displays only
when status 4 is selected. A NO value equals: Invalid.
Sets to ACK signal width of the IEEE1284. Displays only when
the IEEE1284 board is installed. The default value is 0.5.
COUNTERS MODE
DESCRIPTION
Selects the counter category: Print head, Dispenser, Cutter, Life
Cycle. LINE key moves the cursor and the FEED key selects
the option.
Print Head counter display. Displays the quantity of times the
print head has cycled.
Offers the option to reset the counter to zero. The default value
is NO. LINE key moves the cursor and the FEED key selects
the option.
Dispenser counter display. Displays the quantity of times the
dispenser has cycled.
Offers the option to reset the counter to zero. The default value
is NO. LINE key moves the cursor and the FEED key selects
the option.
Cutter counter display. Displays the quantity of times the cutter
has cycled.
PN 9001125A Page 4-21