SATO M5900RVe Operator's Manual page 29

Unit 4: Operation
3-1 3-2
OFF OFF
3-1
Operating Mode
3-2
3-3 Label Sensor
3-4 Backfeed
3-5 Print Start Signal
3-6
External Signal Type
3-7
Repeat Print via Ext
3-8
Signal
FUNCTION
Operating Mode
Label Sensor
Back Feed
Print Start Signal
External Signal
Repeat Print External Signal
SATO M5900RVe Operator Manual
DSW3 DEFAULT SETTINGS
3-3 3-4
OFF OFF
DSW3 CONFIGURATION
3-1 3-2
OFF OFF
OFF ON
ON OFF
ON ON
OFF
ON
OFF
ON
OFF
ON
3-6 3-7
OFF OFF
OFF ON
ON OFF
ON ON
OFF
ON
DSW3 FUNCTION DESCRIPTIONS
Batch/Continuous, Tear-Off, Cutter, Dispenser
Enabled, detects the label's edge and positions it automatically.
Disabled, it is under software control.
Enabled, positions the last printed label for dispensing and retracts
the media for printing the next.
Allows an external device to initiate a label print for synchronization
with the applicator. When on, the unit is in the Continuous print mode,
Backfeed is disabled and External Signals are ignored.
Refer to the Interface Specifications unit for information.
Allows an external device to repeat the print siquence.
PN 9001125A
3-5 3-6
OFF OFF
Batch/Continuous
Tear Off
Cutter
Dispenser
Sensor Used
Sensor Not Used
Enabled
Disabled
Disabled
Enabled
Type 4
Type 3
Type 2
Type 1
Disabled
Enabled
DESCRIPTION
3-7 3-8
OFF OFF
Page 4-5