Description; Autoclaving - Rainin Pipetman F Series Manual

Description

Pipetman-F single-volume microliter pipettes are excep-
tionally accurate and highly reproducible when pipetting
volumes from 0.1 µL to 10 mL, and offer simple calibra-
tion in the laboratory. Accurate compensation for varia-
tions in fluid viscosity and density can be performed with
the Calibration Key provided with each unit.
Pipetman incorporates a highly polished stainless steel
piston, patented polyethylene seal, and neoprene com-
pression O-ring. No routine maintenance or lubrication is
required for long, trouble-free service. The body is made
of high-impact chemical-resistant plastic with low ther-
mal conductivity. Pipetman may be held for prolonged
periods without affecting sample volume reproducibility.
A stainless steel tip ejector is provided with all Pipetman
models except F-1001 to F-10ML. The tip ejector permits
safe, non-contact disposal of used tips.
Calibration label
Micro-indicator dial
for precision
calibration adjustment

Autoclaving

The shaft and tip ejector are autoclavable: 121°C, 1 bar,
15–20 minutes.
Plunger
Shaft
Polypropylene
disposable tip
Tip ejector
button
Body:
high-impact,
low thermal
conductivity
plastic
Stainless steel
ejector arm
(removable)
Calibration
Key
Pipetman-F Pipette
1