Weslo Pursuit upright User Manual page 9

5. Tip: Avoid pinching the wires and the cables.
Slide the Upright (2) onto the Frame (1).
See the upper drawing. Attach the Upright
(2) with three M8 x 16mm Screws (47), three
M8 Split Washers (14), and three M8 Curved
Washers (61); start all the Screws, but do not
fully tighten them yet.
See the lower drawing. Finish attaching the
Upright (2) with two M8 x 65mm Bolts (68), four
M8 Curved Washers (61), two M8 Split Washers
(14), and two M8 Locknuts (45); start both
Locknuts, and then tighten them.
See the upper drawing. Tighten the three
M8 x 16mm Screws (47).
6. Attach the Water Bottle Holder (36) to the
Upright (2) with two M4 x 16mm Flange Screws
(69); start both Flange Screws, and then
tighten them.
5
Avoid pinching
the wires and
the cables
47
14
61
1
45
14
61
68
6
69
9
2
47
14
61
61
14
47
2
61
45
14
61
61
68
2
36