Advertisement
2
Click
to focus on the subject.
ONE PUSH
The camera automatically focuses on the subject. Note that the color of the status indicator (
turns from black to orange.
If the camera fails to focus on the subject, the status indicator (
adjust the focus (in Step
3
Click
/
NEAR
FAR
4
Deselect the [MANUAL] check box.
Be sure to deselect the check box to prevent the loss of focus due to wrong operation.
The check box is automatically deselected if you switch from the focus adjustment screen to another
screen.
Use the mirror function to electronically flip the displayed subject.
If you installed the camera upside down or intend to monitor the subject in the mirror, configure the following
settings according to the installation environment of the camera.
In [MIRROR], select the desired mirror mode and click
OFF: Disables the mirror mode (normal video).
Flips the video vertically and horizontally.
HV:
H:
Flips the video horizontally.
V:
Flips the video vertically.
The configured settings will be applied commonly to "CAM1" and "CAM2" selected under [VIEW].
You can configure the privacy mask settings to hide specific portions of surveillance video for privacy protection.
When a privacy mask is set, the resolution, frame rate, and image quality of the live video image may be limited.
The configured settings will be applied commonly to "CAM1" and "CAM2" selected under [VIEW].
1
Click [PRIVACY MASK] in the sub menu.
The PRIVACY MASK SETTINGS screen appears.
3
).
to focus on the subject.
A
) will show "ERROR". In this case, manually
.
SET
Working with Administrator Configuration Screens 29/50
A
) "FOCUSING"
Advertisement
