Advertisement
The RTSP port number must be 554 or otherwise a number in the range of 1 to 65535.
The RTP port (video and audio) numbers must be even numbers in the range of 1026 to 65534
(except for numbers between 3874 and 5000, between 9874 and 10000, between 38087 and 38214,
and between 49026 and 49152).
If you intend to access the camera from video viewer or similar software, you may name each stream (access
name) as you like for easy identification.
In [ACCESS NAME], type the access name (up to 32 alphanumeric characters) and click
Access name works for H.264 video only.
To enable multicast streaming, configure the multicast address, port numbers, and TTL for each stream, and click
SET
.
In [RTP PORT], specify an even number between 1026 and 65534. Make sure the specified number
is not used as RTP unicast port number.
(except for numbers between 4000 and 5000, 10000, 10001, 38214, and 49152.)
The multicast TTL must be specified in the range of 1 to 255.
Working with Administrator Configuration Screens 6/50
SET
.
Advertisement
