Advertisement
The operation privileges of users who perform network operation are divided into 3 levels (admin, operator, and
guest). Each user who attempts to access the camera will be authenticated by the user name and password at
login and granted an appropriate operation privilege.
Operation
Monitor live video.
Switching between JPEG image and H.264
video
Selecting H.264 video stream protocol
Changing the user password
Configuring settings
○ : Available
△: Available (Excluding NETWORK SETTINGS)
–: Unavailable
Disabling authentication check at login
You may set [ANONYMOUS USER LOG IN] to "ON" on the USER SETTINGS screen to allow anyone to access
the camera without any authentication check at login.
In this case, all login users are regarded as guest users.
This means that users will be presented with an authentication check dialog box if they attempt to
perform any operation beyond the guest user privilege and must enter an adequate user name and
password to proceed.
Login is permitted to the following 5 users.
When you access the camera for the first time, log in as an admin user.
Operation Privileges
admin
admin
admin2
admin3
operator
operator
guest
guest
Update your password periodically for security reasons.
For details, refer to the "USER SETTINGS" section.
Up to 20 users have access to one camera at a time.
○
○
○
○
○
User
Password (Default)
admin
admin2
admin3
operator
guest
Operation Privileges
admin
operator
○
○
○
○
△
Before You Begin Network Operation 12/13
guest
○
○
–
–
–
Advertisement
