General Pipe Cleaners Gen-Eye Micro-Scope2 Operating Instructions Manual page 5

Command Module Controls
Video
Rotate Image
Record
Snapshot
Long press to power ON or OFF
Zoom in the live camera image from 1X to 4X
Zoom out the live camera image from 4X to 1X
Open Image viewer from image mode or Video viewer
from video mode
Browse image and video files
Scroll in the Programming Menus
Restart a video in video viewer
Browse image and video files
Scroll in the Programming Menus
Restart a video in video viewer
Press to open the Function Programming Menu
Press to enter and confirm functions
Press to return to the prior menu or to the main display
Press to take and store a snapshot
Decrement a programming value
Press to start/stop video recording
Increment a programming value
Open the video trash utility from the video viewer
Rotate the record image 90 degree
While in live image mode, press this bottom to set
Brightness, Contrast, and Grey scale
GEN-EYE MICRO-SCOPE2 COMMAND MODULE
The Command Module should not be used in wet locations or in the
rain, as moisture may cause damage to the unit.
THE AC CORD SHOULD ALWAYS BE PLUGGED
INTO THE COMMAND MODULE FIRST, THEN INTO
Gen-Eye Micro-Scope2
Video
Rotate Image
Record
Snapshot
Probe-Rod Brightness
Zoom In & Out
Menu Selection
OK (Select)
Escape
Power On/Off
THE WALL.
®
Video Pipe Inspection/Location System
ATTACHMENTS
A
A. Hook = pick up tool
B. 45° Mirror = gives you a 90° view
C. Magnet = use to pick up metal objects
To use the attachments:
1. Unscrew chrome tip from the end of the Probe Rod and thread
on the desired attachment.
2. Tighten securely before use.
Icons
This is a list of the most commonly displayed icons. Menu and other
icons are presented the instruction manual sections where they apply.
The red video Icon is shown while video is being
recorded; the yellow video icon is shown when in
the standby video mode.
The red camera Icon is shown when a snapshot
image is taken; the yellow camera icon is shown
when in the standby image mode.
Battery charge level
1X...4X Camera zoom levels
00:00:00 Video recording elapsed timer
2015-12-14 Date (YYYY:MM:DD)
22:56:25 Clock time (HH:MM:SS)
USB Flash Drive successfully formatted
Error signal indicating that images or videos were
not saved to USB Flash Drive (typically due to lack
of free space on a storage device)
Video Play and Pause icons
Video fast-forward and fast-rewind
5
B
C