Page 2
INSTALLATION INSTRUCTIONS VOLT Commercial PAR 36 Well Light ® 520 Series Important: Please Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instruc- tions may result in serious injury, property damage and void the warranty.
Package Contents A. (1) Tube E. (1) PAR 36 Lamp B. (1) Brass Grate with Lens F. (2) Screws C. (1) Lamp Holder G. (2) Nuts D. (1) “U” bracket Product Dimensions 6.5” 9” 5.5” Install Tube Dig a 6.5”Diameter, 8” Depth hole on 1”...
Page 4
INSTALLATION INSTRUCTIONS VOLT Commercial PAR 36 Well Light ® 520 Series Install Lamp Holder Attach lamp holder onto “U” Brack- Lamp Holder et and line up holes on them. Pass screws through holes and secure with nuts. Screw “U” Bracket...
Page 5
Install Brass Grate with Lens Affix brass grate with lens onto top end of tube. Brass Grate with Lens Tube Wire Connection Strip two leads from luminaire pigtail. Using two wire connectors, sold separately, connect leads from luminaire to main low voltage supply cable leads.
Need help?
Do you have a question about the 520 Series and is the answer not in the manual?
Questions and answers