Advertisement
DECKED BEST PRACTICES:
INSTALLING VAN SHELVING
DECKED is providing these instruction guidelines as a courtesy to our customers. While DECKED has attempted to ensure that these instruc-
tions are accurate and complete, DECKED makes no warranty whatsoever, express or implied, and expressly disclaims any implied warranty
of merchantability or fitness for a particular purpose, regarding these instructions, any non-DECKED product referenced in them, or the inte-
gration of a non-DECKED product with the DECKED system. Modifying a DECKED system may void the applicable warranty. DECKED disclaims
any liability related to these instructions. All installations are made at the installer's sole risk.
.
|
@
.
|
208 .8 06.025 1
d e c k e d
c o m
s e r v i c e
d e c k e d
c o m
Advertisement
Table of Contents
Related Manuals for DECKED VAN SHELVING
Summary of Contents for DECKED VAN SHELVING
- Page 1 INSTALLING VAN SHELVING DECKED is providing these instruction guidelines as a courtesy to our customers. While DECKED has attempted to ensure that these instruc- tions are accurate and complete, DECKED makes no warranty whatsoever, express or implied, and expressly disclaims any implied warranty of merchantability or fitness for a particular purpose, regarding these instructions, any non-DECKED product referenced in them, or the inte- gration of a non-DECKED product with the DECKED system.
- Page 2 Do not drill into the C-channel, indicated by RED FIG 1A. This channel is where the drawer wheels roll. If van shelving components need to be located on top of the steel C-channel, see FIG 2E for reference. C-channel...
- Page 3 When bolting to the lateral steel tubes, always bolt all the way through the tube using bolt and flange nut (or nylon insert locknut). When bolting to lateral steel tubes over the drawer cavity, use short enough hardware so as not to obstruct drawer function. Alternately, the bolt can be installed from the underside after holes have been drilled.
- Page 4 Always use mounting brackets (circled in red) to attach shelving units to the deck. Avoid placing shelving unit ends directly on the deck. FIG 3A. FIG 3A Distribute mounting attachment load bars (circled in red) over large areas of the deck panel for shelf support.
- Page 5 In the absence of an available lateral steel tube support in the deck or an adjacent shelving end panel to bolt into, transfer the load to the van floor. Take a vertical support and bolt it to the end panel of the DECKED-mounted shelving system and the floor. FIG 6A, FIG 6B. FIG 6B...
- Page 6 WARNING: Adding shelving units or making any other modifications to the DECKED system may put you or others at risk of bodily harm. Although we believe that this installation technique is valid, we do not guarantee that any shelving units or installation techniques will work satisfactorily in all cases.
Need help?
Do you have a question about the VAN SHELVING and is the answer not in the manual?
Questions and answers